If you source parts for a living, you know how a stamped metal component can look like a line item. It’s one small piece in a larger assembly, and it’s easy to treat it as an expense to be minimized.
Working with stamped metal parts every day, sometimes producing tens of thousands for a single program, we definitely understand that instinct.
But we’ve also helped a lot of our customers resolve issues that stemmed directly from the fact that the lowest cost-per-part up front was the only measure of the supplier, allowing quality issues to creep into the program.
The trouble rarely shows up on the purchase order. It shows up later:
- A terminal that won’t seat in its housing.
- A bus bar that fights the assembly operator.
- A lot with burrs that slow the line.
Then comes the sorting, the rework, the expedited freight and the missed ship date…
Any one of those can wipe out the savings from a cheaper quote, and the cost lands on your assembly floor instead of the supplier’s.
Why Precision Matters in Electrical Stampings
Electrical parts have less room for error than many other stampings.
- They often mate with connectors, insulators, housings or fasteners, and a small deviation can stack up with other tolerances across an assembly.
- Dimensions affect fit, but they also affect function. Contact pressure, current-carrying capacity and long-term connection reliability all depend on the part being made the way it was designed.
Material is also a big part of the picture:
- Copper, brass, aluminum and stainless steel each behave differently in the die.
- Thickness variation, springback and grain direction can change how a formed feature ends up.
- Burrs can affect both assembly and electrical performance.
Controlling these variables takes tooling experience, process discipline and inspection that starts before the first part is struck.
That is where Stone City Products comes in. We have specific experience stamping electrical components that must fit precisely within complex assemblies. From sourcing the material to packaging the finished product, we manage the process so the parts meet your specifications.
A Metal Stamping Program You Don’t Have to Babysit
When Stone City manages your program, the details above stop being your worry. Our customers trust us to run their production and deliver quality parts on schedule, so they can get back to running the rest of their business. Our engineers can also review designs early and suggest changes that make parts easier to produce and assemble, which is often where the biggest savings are found.
This matters most to customers who have sourced stampings overseas. Long lead times, time zone delays and slow answers to simple questions can turn a minor issue into a major one.
Working with a domestic partner is often a breath of fresh air, and the responsive communication alone can be reason enough. When you call, you reach people who know your parts and can act on your question.
Common Electrical Stamping Components and What Makes Them Tricky
The table below lists some of the stamped electrical components we see most often, along with the manufacturing considerations that matter most for each. Your application may involve different priorities, and we’re happy to review those with you.
| Component | Common Manufacturing Considerations |
| Terminals and connectors | Tight bend radii, consistent contact geometry, plating compatibility and burr control |
| Bus bars | Flatness, hole and slot position accuracy, thick copper or aluminum forming and clean edges |
| Contacts and contact springs | Controlled spring properties, thickness consistency and repeatable form after springback |
| Grounding clips and straps | Material conductivity, retention features and consistent clip force |
| Lugs | Barrel forming accuracy, hole location and thickness to support current load |
| Electrical enclosure components | Flatness, bend accuracy, hole patterns for mounting and fit with mating panels |
| Mounting brackets and hardware | Hole-to-edge position, bend angle and stack-up with surrounding parts |
| Shielding and EMI components | Thin-gauge handling, flatness, and fine-feature accuracy without distortion |
| Heat sinks and thermal plates | Flatness, surface condition and consistent material thickness for thermal contact |
| Lead frames and small formed leads | Fine features, tight tolerances and burr control at small scale |
| Washers, spacers and shims | Thickness targets, flatness and tight inner and outer diameters |
Looking Beyond the Quote to Support Your Electrical Assembly Program
A stamped electrical part is one piece in the puzzle, but a poor fit in one spot can throw off the whole picture.
With that in mind, the better question than “What does it cost per part?” is actually “What does it cost to get good parts on time, every time?”
At Stone City Products, we deliver on the latter while still keeping your cost-per-part at a minimum through lean manufacturing and well-vetted sourcing strategies.